There are many factors to consider when designing a wet room, and you need to consider heat, ventilation, and drying in a wet room. You should also think about frameless showers and in-built shelves for bathroom shower products. Take your time to think through all the elements of your scheme. This way, you will have a room that is suitable for your family’s needs. After all, you want it to be as comfortable as possible!
Table of Contents
Designing a wet room
Wet rooms are becoming increasingly popular in homes today, and they can add value to a home. If you’re considering a wet room design for your bathroom, you should understand that there are many considerations to consider. One of the first is how much space you’re willing to dedicate to the space. A wet room should be as open as possible, with no steps or raised portions. The best bathrooms will also feature a large skylight that creates an illusion of being outdoors. You’ll also want to use two separate lighting circuits: overhead and mood lighting. The lighting should be complemented by natural lighting sources, like skylights, and will depend on how much natural light your bathroom receives.
Another consideration when planning a wet room is the size of your showering space. A standard shower space is usually rectangular with a glassed-in area in the middle. This design creates a room that looks like it belongs in a luxury hotel or resort. You can also consider the size of the tub, shower and toilet and choose the type of shower system you’d like to use. It’s important to choose a concealed shower valve for a stylish finish, and you may want to consider a hand shower or double shower heads for an elegant look.
Heat, ventilation and drying in a wet room
Unlike conventional bathrooms, wet rooms allow for great flexibility of movement. This makes them ideal for people with mobility problems or disabilities. Besides being more spacious and less cramped, wet rooms also provide excellent ventilation. Moreover, you can install a shower door if you desire. This type of bathroom also requires less walls, which make it easier to clean.
There are a few considerations you need to make before installing a wet room. It is very important to make sure the room is properly ventilated. Wet rooms can be difficult to completely dry once they have been used. If you’re concerned about mould, make sure you install a reliable ventilation system.
Frameless showers
When considering frameless showers for your wet room, keep in mind that they will cost a lot more than a framed shower. They have more hardware and glass, which means more labor. Moreover, the glass is thicker, so they’ll need more support. In addition, a frameless shower’s glass will need to be properly caulked to prevent leaks. However, the installation process should only take a few days.
To measure the width and depth of your shower, use a tape measure. You should measure it from side to side, at least twice. This is essential because walls can deform with age and alcove enclosures may be slightly out of square. Once you have these measurements, round them to the nearest eighth inch or quarter-inch.
Ventilation
Ventilation is very important in a wet room where you have both a shower and a bathtub. Installing a fan will help to circulate air in the room, and it should be placed near the area where the shower and tub are. A fan can also be installed in the water closet. If you are unsure about the ventilation in your wet room, consult an HVAC expert for assistance.
As per building regulations, all bathrooms must have some form of ventilation. You can use an extractor fan or a window to do so. However, professional installers recommend that you use a combination of the two for optimal ventilation. Opening a window may cause a cold draught that may make the temperature inside the wet room uncomfortably hot or cold.
